VOLTER SX series CNC Routers have processing area 1 020 * 1 200 mm. This is the ideal solution for the production of small parts. 

Larger ball screws with a higher pitch and more powerful servo motors, increased feed rate (200mm/s) and thus significantly increased the desired productivity of the machine.

This model has been fitted with a more robust gantry tube to increase production tolerances, which also allows us to fit more powerful spindles and the ability to milling materials up to 350mm in thickness.

Specification

Controller VOLTER CS
Processing area, mm. 1 020 * 1 200
Type and quantity of motors 4 servo motors 750W
Max travel speed on X and Y axes, mm./sec. 250
Max travel speed on Z axis mm./sec. 100
Max thickness of material , mm. 350
Spindle power, kW 4.5 to 6.6
Spindle rotation speed, RPM from 1 000 to 24 000
Tool clamping Mechanical or pneumatic
Type of drives for X and Y axes Servo, ball screw
Type of drive for Z axis Servo, ball screw
Control panel 10" touch monitor

 

Model range

Model Processing area, mm Dimensions, mm Weight, kg
VOLTER SX 1 020 * 1 200 mm 2 140 * 1 770 * 1 940 mm 600

 

Configuration

Basic configuration
Monitor
Vacuum hold down
Brush foot
Steel welded base frame
Spindles
Tool length sensor
Laser pointer of the zero point
Specification
Tool lubricator
VECTRIC VCarve Pro software
Vacuum pump BUSCH SAMOS 7,5 kW
Vacuum pump BUSCH MINK 4 kW
Dust collector MasterVac TS220
Dust collector MasterVac TS300
IP camera
Automatic tool changer
Basic configuration
Monitor

Touch-screen monitor is the main control panel of VOLTER CNC Routers. This monitor allows to control processing and change settings. User friendly interface has a modern, convenient and intuitive design.

Vacuum hold down

Vacuum hold down is the most effitient solution for fixing the material on the machine during processing. The vacuum table consists of extruded aluminum profiles, a sacrificial PVC layer and a system of hvacuum valves for controlling the vacuum zones. Quantity of vacuum zones varies from 4 to 12 depending on the size of the working field of the machine.

Brush foot

Designed to remove chips and waste from cutting zone. Chips fall into a special chamber mounted on the spindle and are removed through a special pipe into the dust collector.

Steel welded base frame

Steel frames of VOLTER machines is welded from cold-rolled steel pipes. Each frame undergoes thermal stabilization to maintain its geometric dimensions for the full lifetime of the machine. The seats for the installation of linear guides and helical racks are processed by high-precision machining center.

Spindles

VOLTER CNC Routers have air-cooled  spindles from HITECO (Italy) company with power from 4.5 to 6.6 kW. ER32 collets are used for all spindles. There is a choice between spindles with pneumatic or mechanical clamping. The maximum rotation speed is 24 000 RPM.

Tool length sensor

The sensor allows to measure the length of the bit quickly and accurately. It is enough to push a botton on touch screen monitor. Results of this measurement will be saved in the controller, which prevents damage of the working surface of the machine.

Laser pointer of the zero point

Laser pointer allows operator to set starting point of a job quickly and easily. It is enough for it to move the laser pointer to angle of sheet and click "Save" button on the touch screen monitor.

Specification
Tool lubricator

The system carries out a dosed supply to the cutting zone of lubricant emulsion or air flow. Continuous supply of lubricant (in the form of oil mist) or compressed air lets to maximize tool lifetime, improve  quality of processing and increase speed of processing.  It is necessary to connect an external pressed air supply with a working pressure of at least 6 bar to operate this lubrication system.

VECTRIC VCarve Pro software

VECTRIC VCarve Pro software to create and prepare 2D and 3D files for CNC Routers. Large selection of formats for importing files, intuitive interface.

Vacuum pump BUSCH SAMOS 7,5 kW

High efficient 7.5 kW vortex blower is supplied complete with air filter, pressure gauge, safety valve and fittings for connecting to the machine. Do not require maintenance during the entire life cycle.

Vacuum pump BUSCH MINK 4 kW

Rotary vacuum pumps Busch MINK (Germany) are an effective and reliable solution for vacuum hold down of materials. The cam rotors do not come into contact with each other or with the cylinder in which they rotate. The extremely small clearances between the cam rotors and the casing optimize the internal seal and guarantee a consistently high pumping speed without using of lubricating fluids.

Dust collector MasterVac TS220

TS 220 is a reliable industrial dust collector for removing chips and dust during processing of various materials. The model is designed to work in the most hard operating conditions. Equipped with an industrial three-phase electric motor 400 V / 2200 W and a vacuum turbine with a side channel. The dust collector has a 30 l chip storage tank.

Dust collector MasterVac TS300

TS 300 is a reliable industrial dust collector for removing chips and dust during processing of various materials. The model is designed to work in the most hard operating conditions. Equipped with an industrial three-phase electric motor 400 V / 2200 W and a vacuum turbine with a side channel. The dust collector has a 100 l chip storage tank.

IP camera

The option allows to cut the printed image along the contour. When preparing a file for printing, marks are added to the file — black circles with a diameter of 5-8 mm placed behind the contour of the image to be cut.

Printed image is placed on the machine and after starting the job, the camera checks locations of marks. Special software of the machine make adjustments to the job file. It lets to cut printed image exactly on the contour regardless of geometric distortions encountered in print and location of printed image on the machine. 

Automatic tool changer

This system automatically changes tools during processing. It lets to save time for jobs which need several tools for processing.

Controller saves length of each tool in the system. As result, it is not nesesarry to measure tool length after changing of a tool by this system.

VOLTER automatic tool changer has 7 positions for tools.

Contact us
* Required fields

Please accept the cookies we use. These cookies allow you to seamlessly browse our website, help us analyze traffic, improve and personalize content and advertising. Learn more

 

Below you will find the categories of cookies used on our website that you can enable or disable. Functional cookies cannot be disabled because they are necessary for trouble-free web browsing. Your cookie settings can be changed in the future using the icon in the footer of the website.

Functional cookies — These cookies are necessary for the proper functioning of our website. Thanks to them, we can, for example, save your cookie settings and allow you to change them in the future.

Analytical cookies — These cookies help us analyze site traffic and track site traffic by collecting anonymous information. Thanks to this data, we can improve our site more efficiently.

 

 

Marketing cookies — these cookies help us personalize your advertising, ie.that we will be able to remind you of relevant advertising in the future.